RTG Shower & Tub Non-Slip Paint increases traction and peace of mind when you’re standing on wet tub and shower floors. No more worries about slip and fall injuries. Its visually appealing, low-luster surface is not only easy to clean-it’s easy to keep clean, which can’t be said of gunk-gathering tub mats and grimy, self-stick decals that leave residue. Tub mats and decals don’t cover the entire floor surface so you’re limited to sitting or standing exactly where you place them. With Shower & Tub Non-Slip Paint, you can make the entire floor slip resistant and much safer. You can even paint the side of the tub for added grip.

It not only looks good, it feels good, too, because its non-abrasive traction additive is comfortable against the skin, not gritty like other non-slip paints. And unlike bulky bath mats or adhesive decals that lose their grip and require frequent replacement, this durable coating puts safety first with a unique, water-based polyurethane formula that provides long-lasting slip resistance.

Fast-drying formula makes this an easy DIY weekend project. Just stir well and use a brush or roller to apply to properly prepared acrylic, fiberglass, or enamel surfaces. Paint 2-3 coats in a single day, and it’ll be ready to use in just 24 hours. Because RTG Shower & Tub Non-Slip Paint is a water-based coating, it has no nasty fumes or toxins, which makes it great for indoor use, and easy to clean up with just soap & water. It’s so easy to use and affordable that you won’t mind reapplying a maintenance coat once a year for added traction and safety.

Compare to SlipDoctors Anti-Slip Bathtub Treatment and SparkleTuff Anti-Slip Floor Coating. RTG Shower & Tub Non-Slip Paint has a softer non-slip texture & better coverage.

Important surface prep: Do not use on ceramic, porcelain, or tile. All surfaces must be clean, dry and free of grease, dirt, and oils, Carefully mask off and sand with 220 grit. Remove residue and wipe clean with lint-free rag.

Product Features

• Non slip traction coating provides sure footing to help prevent slips and falls in showers and bathtubs. Visually appealing, long-lasting finish is easy to clean
• Comfortable, non-abrasive traction additive feels good on sensitive skin and bare feet, not rough or sticky.
• For acrylic, fiberglass, & enamel surfaces in good condition. Very easy to apply by brush or roller. Fast-drying paint lets you recoat in as little as 1 hour. Ready to use 48 hours after final coat
• Low-VOC, eco-friendly formula has no toxic fumes-perfect for indoor use. Easy soap & water cleanup. Colors: White, Cream, Light Gray & Clear/Amber. Coverage: 80-100 sq ft per quart (standard tub)
• IMPORTANT: Not for use on porcelain, tile, or ceramic surfaces. Surfaces must be completely clean, dry and prepped by sanding or finish will not stick. Follow instructions carefully for great results